New on our website: Type B tees and elbows, 3D and 5D bends, barred tees and sweepolets
We have added a set of new product pages to arshyapipefittings.com. Each one covers sizes, grades, inspection and what to put in your enquiry, and each has its own quote form. Here is what is new.
EN 10253 Type B tees and elbows
Type B fittings to EN 10253-2 and EN 10253-4 carry the full service pressure of the connecting pipe. Tees have a thicker body where the branch opening weakens them; elbows have extra wall at the intrados. In both cases the ends are machined to your pipe wall. Sizes run from DN 15 to DN 1200 in non-alloy, Cr-Mo, stainless and duplex grades.
3D and 5D induction bends
Long-radius bends made by hot induction bending, from 2" to 48", any angle up to 180°, with straight tangents to your length. 3D saves space while keeping pressure drop low; 5D is the usual choice for piggable pipelines, with ovality and wall thinning measured on every bend.
Barred tees
Equal and reducing tees with guide bars welded across the branch opening, so pipeline pigs pass the branch without tilting into it. Tee bodies to MSS SP-75, ASME B16.9 or EN 10253, with the bars to your specification.
Sweepolets
Contoured, integrally reinforced branch outlets to MSS SP-97, joined to the run with a butt-type weld that can be fully radiographed or ultrasonically tested. A common choice for steam headers and other high-pressure, high-temperature or cyclic service.
Every page lists EN 10204 3.1 certificates as standard, with 3.2 available through the inspection body you nominate.
Fittings are manufactured at our group manufacturing facility, which holds ISO, PED (TÜV), AD 2000, IBR and ASME approvals.
Have a project coming up? Send your size list through the quote form on any of these pages.

Comments