top of page

From straight pipe to finished elbow: six steps at our group facility

Anuj Nagpal
Oct 30
2 min read

Most elbows in a European pipe rack started life as a straight length of pipe. Here is what happens in between at our group manufacturing facility in Palwal, Haryana, a 92,000 sq ft plant equipped for hot forming, heat treatment, machining and in-house testing.

1. Cut

The mother pipe is cut to length on a band saw. Before anything else happens, the heat number is transferred to every piece, so each fitting can be traced back to its material certificate.

2. Form

The cut piece is hot-formed on a hydraulic press while an induction coil heats it. The metal moves gradually around the bend, and on an elbow it naturally thickens on the inside of the bend, which matters when the order calls for EN 10253 Type B.

3. Heat treat

Formed fittings go into the furnace. Depending on the grade this means normalising, annealing or solution annealing, plus post-weld heat treatment for Cr-Mo grades.

4. Bevel

The weld ends are machined on CNC bevelling machines, so the end wall and bevel match the pipe the fitting will be welded to.

5. Check

PMI (positive material identification) confirms the grade. Hardness, tensile and impact tests are done in our own laboratory, with RT, UT, dye-penetrant or magnetic-particle testing as the order requires.

6. Mark and pack

Each fitting is marked with its heat number, grade, standard and type, exactly as on the EN 10204 3.1 certificate. Then it is wrapped, capped and packed in seaworthy wooden cases or on pallets for the journey.

The heat number is the thread that runs through all six steps. If it breaks anywhere, the certificate means nothing.

Fittings are manufactured at our group manufacturing facility, which holds ISO, PED (TÜV), AD 2000, IBR and ASME approvals.

Want to see what this process delivers on a full-pressure fitting? Read about our EN 10253 Type B elbows, or learn more about the plant and team.

Recent Posts

See All

Comments


+91-022-44818932

©2026 Arshya Pipe Fittings Pvt. Ltd.

Arshya Pipe Fittings Pvt. Ltd. exports buttweld pipe fittings to more than 30 countries across Europe, the Gulf and Middle East, Asia, Africa and the Americas.

MONEL®, INCOLOY® and INCONEL® are registered trademarks of Special Metals Corporation. Hastelloy® and other names are the registered trademarks of their respective owners.

bottom of page